Siemens siprotec 7SA6, Manual

Page: 126 / 876

SIPROTEC
®
4 Devices
4-32
7SA6 Manual
C53000-G1176-C156-2
To set the framing and baud rate:
•
Double click on
Serial Ports
in the data window and enter the specific settings
in the window that follows.
Figure 4-28 DIGSI
®
4, Interface Settings Window
•
Read-out on the
Operator Control Panel
The interface settings can be checked using the SIPROTEC
®
4 device operator con-
trol panel.
In the main menu, select
Settings
→
Setup/Extras
→
Serial Ports
→
follow-
ing menus.
Figure 4-29 Read-out of serial interface settings from the operator control panel, example
SERIAL PORTS 01/03
---------------------
Front Port –> 1
System Port –> 2
Service Port –> 3
SETUP/EXTRAS 03/06
---------------------
Date/Time –> 1
Clock Setup –> 2
Serial Ports –> 3
Device–ID –> 4
MLFB/Version –> 5 5
Contrast –> 6
Note:
The serial interface for the connection of a time control device is described in the Sub-
section 4.14, Time Synchronization.