Siemens siprotec 7SA6, Manual

Page: 868 / 876

Index
Index-2
7SA6 Manual
C53000-G1176-C156
Configuration
5-1
Operator interface
5-55
Scope of functions
5-2
Serial port on PC
5-54
Service interface
5-55
Sheet
5-41
Configuration of Functions
5-2
Configuration of the automatic reclosure function
6-207
Configuration of the Binary Inputs and Outputs
5-9
Configuring
an Indication Buffer as a Destination
5-33
and Connecting Function Modules
5-42
CFC as a Destination
5-34
Default and Control Display as a Destination
5-34
the Metered Value Window as a Destination
5-35
the System Interface as a Destination
5-34
Configuring Binary Inputs as Sources
5-28
Configuring the Default and Control Display as a
Destination
5-34
Confirmation
6-3, 6-6
Connecting an external reclosure device
6-199
Connections
to Electrical Communication Interfaces
2-20, 2-34
to Optical Communication Interfaces
2-30,
2-32
to Serial Communication Interfaces
2-20,
2-21
Connections to
Electrical Communication Interfaces
2-46
Serial Communication Interfaces
2-35,
2-48, 2-49
Connections to Terminals
2-30
Consistency check
5-43
Construction
10-13
Contact chatter suppression
5-37
Control
During Operation
7-1
Control Logic using CFC
6-323
Control Messages
7-58
Control of Device Functions
7-28
Control of Switchgear
7-46
Control of the internal automatic reclosure
6-201
Control Voltages for Binary Inputs
8-15
Controlled Zone Z1B
6-63
Copying Setting Groups
6-14
Correction of measured values for load current on
double-end fed lines
6-244
Correction of measured values on Parallel Lines
6-243
Corrective Action / Repairs
9-12
Creating User Defined Functions with CFC
5-39
Current flow monitoring
6-249
Current Inputs
10-2
Current Symmetry
6-276
Current Transformer Connection
6-9
Current Transformer Saturation
6-22
Current, Voltage, and Phase Rotation Checks
8-59
Currents
8-9
Cyclical Restoration
5-36
D
Data Connections
8-41
Data Storage for Fault Recording
6-312
Date and Time Stamping
5-58
Dead line check (DLC)
6-196
Dead line check/ reduced dead time
6-207
Dead-line or dead-bus closing
6-219
Definite Time High Set Current Stage 3I0>>
6-122
Definite Time High Set Overcurrent Stage I>>
6-163
Definite Time Overcurrent Stage 3I0>
6-122
Definite Time Overcurrent Stage I>
6-164
Definite Time Overcurrent Stages Iph>, 3I0>
6-171
Definite Time Stages
6-128
Definite Time Very High Set Current Stage
3I0>>>
6-122
Delay timers
6-255
Deleting groups
5-27
Deleting information
5-27
Description of Functions
6-227
Destination
5-19
Detached Operator Panel
10-53
Detection of Line Energization
6-292
Determination of
the Fault Location
6-242
Differential protection topology
10-29
DIGSI REMOTE 4
A-12
Dimensions
10-47
Direct Underreach Transfer Trip
6-95
Direct Voltage
10-2
Direction Determination
6-56, 6-132, 10-21
with Negative Sequence System
6-127
with the Zero Sequence System
6-126
Directional Blocking Scheme
6-146
Directional Checks with Load Current
8-60
Directional Comparison Pickup
6-99