Siemens siprotec 7SA6, Manual

Page: 545 / 876

Control During Operation
7-31
7SA6 Manual
C53000-G1176-C156-2
To change the time offset or the tolerance time for a clock error signal, select
Clock
Setup
under
SETUP/EXTRAS
, as shown in Figure 7-29. Under
Offset
, the time off-
set can be changed. Under
Error Time
, the time delay for the alarm can be adjust-
ed. These adjustments are done in the same manner as setting the time, by overwrit-
ing the displayed values and confirming with the
key.
To return to the
S
ETUP/EXTRAS
level, press the key, several times if necessary. To
return to the
MAIN MENU
, press the key.
Figure 7-29 Date and time settings from the front panel
From PC with
DIGSI
®
4
To manually change the date and time of the device:
Click on
Device
in the menu bar as shown in Figure 7-30. Select the command
Set
Clock
.
Figure 7-30 Selecting the command
Set Clock
in DIGSI
®
4
A dialog field,
Set clock & date in device
, is opened. The displayed values
are the present date and time. The day of the week is automatically derived from the
date — and cannot be edited.
•
Edit the input fields
Date
and
Time
. The format depends on your regional settings
of the PC. See Figure 7-31.
Date: mm/dd/yyyy or dd.mm.yyyy
Time: hh.mm.ss
Click on
OK
to transfer the entered values into the device. The previous values are
changed and the dialog field is closed.
ENTER
MENU
SETUP/EXTRAS 02/06
--------------------
> Date/Time –> 1
> Clock Setup –> 2
CLOCK SETUP 01/03
--------------------
Offset > 0min
Error Time 2min
Source Internal
: