manualshive.com logo in svg

Rohde & Schwarz 1321.1211.02, User Manual

Share
Download
Rohde & Schwarz 1321.1211.02 User Manual Download Page 56

Basic Operation

R&S

®

Cable Rider ZPH

49

User Manual 1321.0950.02 ─ 07

Selecting the language

The R&S Cable Rider ZPH supports several languages for the user interface.

The following is a list of languages that the instrument supports:

English

Spanish

Japanese

Russian

French

Italian

Chinese

Hungarian

German

Portuguese

Korean

Traditional Chinese

1. In the "Instrument Setup" dialog box, select the "Language" item.

A drop-down menu opens to select the language.

2. Select one of the languages from the drop-down menu.

3. Reboot the device to activate the choice of selected language.

Setting the date format

The R&S Cable Rider ZPH provides two different formats to display the date.

1. In the "Instrument Setup" dialog box, select the "Date Format" item.

A drop- down menu opens to select the date format.

2. Select the required date format from the drop-down menu.

Setting the length unit

The R&S Cable Rider ZPH provides two different formats to configure the cable length
unit.

Configuring the R&S Cable Rider ZPH

Summary of Contents for 1321.1211.02














































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands