Remote Commands
R&S
®
Cable Rider ZPH
352
User Manual 1321.0950.02 ─ 07
OFF
Selects single sweep.
*RST:
ON
Example:
INIT:CONT OFF
Turns on single sweep mode.
[SENSe:]SWEep:POINts
<NrofPoints>
This command queries the number of measurement points in a single sweep.
This command is a query and therefore has no *RST value.
Parameters:
<NrofPoints>
Returns the number of sweep points.
Example:
SWE:POIN?
Returns the number of sweep points.
14.6.2.5
Working with Traces
The following commands set up the trace and the various functions associated with it,
e.g. trace mathematics or the selection of the detector.
List of commands
CALCulate<1...2>:MATH<1...2>:COPY:MEMory<1...3>
......................................................352
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MEMory<1...3>[:STATe]
...................................... 353
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MODE
...............................................................353
FORMat[:DATA]
............................................................................................................. 354
UNIT<1...2>:LENGth
...................................................................................................... 354
TRACe<1...2>[:DATA]?
...................................................................................................355
CALCulate<1...2>:MATH<1...2>:COPY:MEMory<1...3>
[<MemorySlot>]
This command stores the selected trace into the memory trace of the R&S Cable Rider
ZPH.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at CALCulate and MEMory are irrelevant for this command.
The numeric suffix at MATH selects the number of the trace.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
<1...3>
1...3
Parameters:
<MemorySlot>
Example:
CALC:MATH:COPY:MEM
Remote Control - Commands
