Cable and Antenna Test Mode
R&S
®
Cable Rider ZPH
126
User Manual 1321.0950.02 ─ 07
7
Cable and Antenna Test Mode
The cable and antenna test (CAT) mode provides functionality to measure cables and
antennas of transmission equipment in wireless telecommunication systems.
In a perfect system, the signal would arrive at the antenna without any losses and be
transmitted with the required power and frequency. In reality, however, you can
encounter many possible mechanical defects in the system that cause a deterioration
of the transmission quality. See
Figure 7-1
for the typical defects in a transmission sys-
tem.
Figure 7-1: Typical defects in a transmission system
The R&S Cable Rider ZPH provides the necessary functionality to test the system
equipment for its characteristics and identify faults when it is being installed or main-
tained.
●
Retrun Loss Measurements
●
SWR
●
Distance to Fault Measurements
●
1-Port Cable Loss Measurements
●
Transmission Measurements
●
Smith Chart
●
Phase Measurement
