Remote Commands
R&S
®
Cable Rider ZPH
406
User Manual 1321.0950.02 ─ 07
Example:
TRIG:LEV:VID 50PCT
Sets the trigger level to 50%.
TRIGger[:SEQuence]:SLOPe
<TriggerSlope>
This command selects the slope of the trigger signal.
The trigger slope applies to all trigger sources.
Parameters:
<TriggerSlope>
POSitive | NEGative
*RST:
POSitive
Example:
TRIG:SLOP NEG
TRIGger[:SEQuence]:SOURce
<TriggerSource>
This command selects the trigger source.
Parameters:
<TriggerSource>
IMMediate | EXTernal | VIDeo | IQPower | GATed
IMMediate
Selects Free Run measurements.
EXTernal
Selects an external trigger.
VIDeo
Selects the video trigger.
IQPower
Selects an IQ Power trigger.
Gated
Selects a gated trigger.
*RST:
IMMediate
For more information, see chapter "Setting the Sweep".
Example:
TRIG:SOUR EXT
Selects the external trigger input as source of the trigger signal.
14.6.3.6
Working with Traces
The following commands set up the trace and the various functions associated with it,
e.g. trace mathematics or the selection of the detector.
List of commands
CALCulate<1...2>:MATH<1...2>[:EXPRession][:DEFine]
.................................................... 407
CALCulate<1...2>:MATH<1...2>:COPY:MEMory<1...3>
......................................................407
CALCulate<1...2>:MATH<1...2>:STATe
............................................................................ 408
DISPlay<1...2>[:WINDow]:TRACe<1...2>[:STATe]
............................................................. 408
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MEMory<1...3>[:STATe]
...................................... 408
DISPlay<1...2>[:WINDow]:TRACe<1...2>:MODE
...............................................................408
Remote Control - Commands
