Interference Analyzer
R&S
®
Cable Rider ZPH
299
User Manual 1321.0950.02 ─ 07
●
Adding and Removing Elements
...........................................................................299
●
Zooming In and Out of the Map
............................................................................ 299
●
Aligning the Triangulation and Outdoor Mapping Mode
........................................300
●
Aligning the Indoor Mapping Mode
....................................................................... 300
●
Selecting Colors for Map Locations
...................................................................... 301
13.3.3.1
Adding and Removing Elements
The result display is made up out of several elements that you can add or remove as
you like.
1. Press the [MEAS] key.
2. Select the "Settings" softkey.
3. Select the "Show" softkey.
The R&S Cable Rider ZPH opens a submenu that contains the result display set-
tings for selection.
4. Select the element you want to add or remove.
● "GPS Information"
Enable or disable the display of "GPS" menu item ("GPS information", "Satel-
lites", "Compass")
● "Compass Information"
Enable or disable the display of "Compass" information. The compass informa-
tion is available with the R&S HL300, R&S HE300 and R&S HE400 antenna.
● "Power Bar"
Enable or disable the power bar information (including the noise squelch level)
● "Power Result"
Enable or disable the power result
● "Hardware Settings"
Enable or disable the display of the
Parameter view
13.3.3.2
Zooming In and Out of the Map
If you have downloaded different zoom levels of your maps, or if you have created a
large (or very small) indoor map, you can change the scale of the map to get a more
detailed view or a more general overview.
Note that the original size of indoor maps depends on the size of the image these
maps are based on.
1. Press the [MEAS] key.
2. Select the "Zoom In" softkey to decrease the scale of the map.
3. Select the "Zoom Out" softkey to decrease the scale of the map.
Working with Maps
