Remote Commands
R&S
®
Cable Rider ZPH
444
User Manual 1321.0950.02 ─ 07
[SENSe:]POWer:ACHannel:BANDwidth[:ACHannel]
<AdjChannelBandwidth>
This command defines the channel bandwidth of the adjacent channel.
The adjacent channel is the first pair of channels next to the transmission channels. If
you set the channel bandwidth for these channels, the R&S Cable Rider ZPH sets the
bandwidth of the alternate channels to the same value.
Instead of BANDwidth, you can also use the alias BWIDth.
Parameters:
<AdjChBw>
*RST:
14 kHz
Default unit: GHz
Example:
See
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
on page 448.
[SENSe:]POWer:ACHannel:BANDwidth[:ALTernate<1...11>]
<AltChannelBandwidth>
This command defines the bandwidth of the alternate channels.
If you set the channel bandwidth for the first alternate channel, the R&S Cable Rider
ZPH sets the bandwidth of the other alternate channels to the same value. The com-
mand works hierarchically: to set a bandwidth of the 10th and 8th channel, you have to
set the bandwidth of the 8th channel first.
Instead of BANDwidth, you can also use the alias BWIDth.
The suffixat ALTernate selects one of the 11 alternate channels.
Parameters:
<AltChBw>
*RST:
14 kHz
Default unit: GHz
Example:
See
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
on page 448.
[SENSe:]POWer:ACHannel:BWIDth[:CHANnel]
<TxChannelBandwidth>
This command defines the channel bandwidth of the transmission channels.
Instead of BWIDwidth, you can also use the alias BANDth.
Parameters:
<TxChBw>
*RST:
14 kHz
Default unit: GHz
Example:
See
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
on page 448.
[SENSe:]POWer:ACHannel:BWIDth:ACHannel
<AdjChannelBandwidth>
This command defines the channel bandwidth of the adjacent channel.
Remote Control - Commands
