Remote Commands
R&S
®
Cable Rider ZPH
387
User Manual 1321.0950.02 ─ 07
OFF
DTF list turns off.
Example:
CALC:TRAN:DTF:PEAK ON
Turns on the DTF peak list.
CALCulate<1...2>:TRANsform:DTFault:PEAK:THReshold
<Threshold>
This command defines the threshold for the DTF list.
All values that exceed the threshold are in the DTF list. You can query the list with
CALCulate<1...2>:TRANsform:DTFault:PEAK:DATA<1...10>?
on page 386.
The numeric suffix at CALibration is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<Threshold>
The unit depends on the measurement format.
Example:
CALC:TRAN:DTF:PEAK:THR -20
Sets the threshold to -20 dB.
CALCulate<1...2>:MARKer<1...6>:FUNCtion:DTF:PEAK:THReshold
<ThresholdLevel>
This command queries the DTF list.
All values that exceed the threshold are in the DTF list. You can query the list with
CALCulate<1...2>:TRANsform:DTFault:PEAK:DATA<1...10>?
on page 386.
The numeric suffix at CALCulate and MARKer are irrelevant for this command.
Suffix:
<1...2>
.
1...2
<1...6>
1...6
Parameters:
<ThresholdLevel>
Numeric value that sets the threshold level.
The unit depends on the measurement format.
Example:
CALC:TRAN:DTF:PEAK:THR -20
Sets the threshold to -20 dB.
14.6.3
Remote Commands of the Spectrum Analyzer
This section provides a detailed description of all remote control commands required to
configure and perform measurements with the spectrum analyzer. These commands
are available in spectrum analyzer mode only.
Remote Control - Commands
