Remote Commands
R&S
®
Cable Rider ZPH
489
User Manual 1321.0950.02 ─ 07
CALCulate<1...2>:MARKer:FUNCtion:DDEMod:MDEPth[:RESult]?
This command queries the modulation depth of the measured signal.
Prerequisites for this command: Select ASK demodulation
[SENSe:]DDEMod
on page 491.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<ModIndex>
<numeric value>
Default unit: PCT
Example:
CALC:MARK:FUNC:DDEM:MDEP?
Query modulation depth.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:DDEMod:MDEViation[:RESult]?
This command queries the frequency deviation of the measured signal.
Prerequisites for this command: Select FSK demodulation
[SENSe:]DDEMod
on page 491.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<Frequency>>
<numeric value>
Default unit: Hz
Example:
CALC:MARK:FUNC:DDEM:MDEV?
Query frequency deviation.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:DDEMod:MERRor[:RESult]?
This command queries the magnitude error of the measured signal.
Prerequisites for this command: Select FSK demodulation
[SENSe:]DDEMod
on page 491.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Remote Control - Commands
