Remote Commands
R&S
®
Cable Rider ZPH
379
User Manual 1321.0950.02 ─ 07
Suffix:
<1...2>
.
1...2
Parameters:
<State>
ON | OFF
ON
Turns on the display of the maximum and average VSWR.
OFF
Turns off the display of the maximum and average VSWR.
*RST:
OFF
Example:
CALC:TRAC:VSWR:MAX:STAT ON
Displays the VSWR results.
MEASurement<1...2>:FORMat
<MeasFormat>
This command selects the measurement format.
The numeric suffix at MEASurement is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<MeasFormat>
MAGNitude | PHASe | VSWR | REFLection | SMITh | LOSS
MAGNitude
Selects the magnitude format.
PHASe
Selects the phase format.
VSWR
Selects the VSWR format.
REFLection
Selects the reflection coefficient format.
SMITh
Selects the smith chart.
LOSS
Selects the cable loss format.
*RST:
MAGNitdue
Example:
MEAS:FORM SMIT
Displays the reflection in a Smith Chart.
CALCulate<1...2>:TRACe:CABLe:LENGth:RESult?
This command queries the results of the electrical cable length.
The numeric suffix at CALCulate is irrelevant for this command.
This command is a query and therefore has no *RST value.
Remote Control - Commands
