Performing Pulse Power Measurements
R&S
®
Cable Rider ZPH
273
User Manual 1321.0950.02 ─ 07
11.2.5
Selecting the Result Unit
In the pulse measurement application, the R&S R&S Cable Rider ZPH can display
measured power in relative units (dBm) or in absolute units (W).
1. For model .02, press the [SCALE] key.
For model .12, press the [SCALE/AMPT] key.
2. Select the "Unit" softkey.
3. Select the unit you prefer.
The R&S Cable Rider ZPH adjusts the y-axis accordingly.
11.2.6
Scaling the Y-Axis
For more information, see
Chapter 7.2.3, "Configuring the Vertical Axis"
,
on page 150.
11.2.7
Using Markers
The Power vs Time diagram supports markers.
For more information, see
Chapter 7.3.2, "Using Markers"
,
on page 157 (note that the
marker functions are not available in the "Power Meter" mode).
Configuring the Power vs Time Result Display
