Remote Commands
R&S
®
Cable Rider ZPH
443
User Manual 1321.0950.02 ─ 07
[SENSe:]POWer:ACHannel:REFerence:TXCHannel:AUTO
................................................ 446
[SENSe:]POWer:ACHannel:REFerence:TXCHannel:MANual
............................................. 446
[SENSe:]POWer:ACHannel:SPACing[:ACHannel]
............................................................. 447
[SENSe:]POWer:ACHannel:SPACing:ALTernate<1...11>
....................................................447
[SENSe:]POWer:ACHannel:SPACing:CHANnel<1...11>
.....................................................447
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
................................................................448
CALCulate<1...2>:MARKer<1...6>:FUNCtion:ACPower:UNIT
<Unit>
This command selects the unit of the ACLR results.
The numeric suffix at CALCulate and MARKer are irrelevant for this command.
Suffix:
<1...2>
.
1...2
<1...6>
1...6
Parameters:
<Unit>
DBM | DBMV | DBUV | DBUA | VOLT | WATT | DUVM | DUAM |
V | W | V_M | W_M2
*RST:
1
Example:
CALC:MARK:FUNC:ACP:UNIT DBM ACLR
Results are converted into the unit dBm.
[SENSe:]POWer:ACHannel:ACPairs
<#ofAdjacentChannels>
This command defines the number of pairs of adjacent channels.
Parameters:
<#ofAdjCh>
The number corresponds to a pair of adjacent channels, one
channel on the left and one on the right of the transmission
channel.
Range:
1 to 12
*RST:
1
Example:
See
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
on page 448.
[SENSe:]POWer:ACHannel:BANDwidth[:CHANnel]
<TxChannelBandwidth>
This command defines the channel bandwidth of the transmission channels.
Instead of BANDwidth, you can also use the alias BWIDth.
Parameters:
<TxChBw>
*RST:
14 kHz
Default unit: GHz
Example:
See
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
on page 448.
Remote Control - Commands
