Getting Started
R&S
®
Cable Rider ZPH
17
User Manual 1321.0950.02 ─ 07
3
Getting Started
The following chapters are identical to those in the printed R&S Cable Rider ZPH Get-
ting Started manual.
●
Preparing for Use
....................................................................................................17
●
Instrument Tour
....................................................................................................... 25
3.1
Preparing for Use
3.1.1
Putting into Operation
This chapter describes the basic steps to be taken when setting up the R&S Cable
Rider ZPH for the first time.
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric shock, fire,
personal injury, or damage.
●
Do not open the instrument casing.
●
Read and observe the "Basic Safety Instructions" delivered as a printed brochure
with the instrument.
In addition, read and observe the safety instructions in the following sections.
Notice that the data sheet may specify additional operating conditions.
Risk of instrument damage
Note that the general safety instructions also contain information on operating condi-
tions that prevent damage to the instrument. The instrument's data sheet may contain
additional operating conditions.
Preparing for Use
