Remote Commands
R&S
®
Cable Rider ZPH
514
User Manual 1321.0950.02 ─ 07
DISPlay<1...2>:CMAP:DEFault
This command sets the display to the default state.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at DISPlay is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Example:
DISP:CMPA:DEF
Restores the original color scheme.
Usage:
Event
DISPlay<1...2>:DATE:FORMat
<DateFormat>
This command sets the display date format.
The numeric suffix at DISPlay is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<DateFormat>
DDMMyyyy | MMDDyyyy
*RST:
DDMMyyyy
Example:
DISP:DATE:FORM DDMMyyyy
14.6.11.4
Audio Settings
This chapter describes all commands to control the audio functions of the R&S Cable
Rider ZPH.
List of commands
SYSTem:AUDio:VOLume
................................................................................................514
SYSTem:BEEPer:POVerload[:STATe]
...............................................................................515
SYSTem:BEEPer:VOLume
..............................................................................................515
SYSTem:BEEPer:KEY:VOLume
...................................................................................... 515
SYSTem:AUDio:VOLume
<Volume>
This command sets the volume of the internal speaker.
Parameters:
<Volume>
Range:
0 to 1
*RST:
0.3
Example:
SYST:AUD:VOL 0.40
Sets the volume to 40%.
Remote Control - Commands
