Working with the Measurement Wizard
R&S
®
Cable Rider ZPH
123
User Manual 1321.0950.02 ─ 07
4. After all the measurements are completed, the R&S Cable Rider ZPH displays a
message "All Measurements Done" in the wizard message box.
Select the "Continue" softkey. The R&S Cable Rider ZPH prompts you to save or
discard the measurement results.
Select the "Save Result" softkey to save the results on the selected storage device
or "Discard Result" softkey to discard all the measurement results.
Table 6-2: Softkey in the measurement wizard
Softkey
Description
Next Meas
The R&S Cable Rider ZPH proceeds to perform the
measurement.
Continue
The R&S Cable Rider ZPH finishes the current mea-
surement and begins with the next measurement by
showing the necessary preparation instruction.
Repeat Meas
Repeat the current measurement
Interrupt
If you interrupt the measurement sequence, you can
change the different settings or measurements as if
wizard is not in used. The R&S Cable Rider ZPH
keeps the results of measurement you have already
performed.
When you finished reconfigured the measurement,
you can resume back to the measurement
sequence.
Skip
Skip a single measurement step and continue the
subsequent measurement step
Skipping individual measurements is possible when
you turn on "Allow to skip measurements and finish
wizard sequence" in the "Wizard Set Editor" of the
R&S InstrumentView software package.
Cancel
Abort wizard measurement. The R&S Cable Rider
ZPH displays a message "Cancel Immediate Wizard
Sequence" in the message box.
If wizard measurement is aborted, the R&S Cable
Rider ZPH displays a message "Save Wizard Mea-
surement Results" in the message box.
If wizard measurement result is saved, the R&S
Cable Rider ZPH returns to the last saved measure-
ment result trace window. If the result is discarded,
the R&S Cable Rider ZPH returns to the
measure-
ment dialog box
.
Exit
Exit wizard measurement.
Performing and Configuring Measurements
