Basic Operation
R&S
®
Cable Rider ZPH
46
User Manual 1321.0950.02 ─ 07
Location to secure GPS receiver (R&S HA-Z340)
Figure 4-2: Location of GPS receiver
●
Tighten the knob screw supplied with the GPS receiver to the screw track at the
back of R&S Cable Rider ZPH.
●
The GPS receiver can be conveniently attached to the knob screw as shown in
Figure 4-2
.
The "Instrument Setup" dialog box provides all settings necessary to configure the
GPS receiver.
Enabling the GPS receiver
1. In the "Instrument Setup" dialog box, select the "GPS" item.
A drop-down menu opens to turn the GPS receiver on or off.
2. Turn the GPS receiver on or off as required.
When "GPS" item is turned on, the R&S Cable Rider ZPH is ready to receive GPS
data.
Displaying GPS information
1. In the "Instrument Setup" dialog box, select the "Show GPS Information" item.
A drop-down menu opens to turn the display of the GPS information on and off.
2. Turn the display of GPS information on or off as required.
Configuring the R&S Cable Rider ZPH
