Cable and Antenna Test Mode
R&S
®
Cable Rider ZPH
146
User Manual 1321.0950.02 ─ 07
1 = Shows the peak the results refer to
2 = Shows the distance from the measurement plane to the peak.
3 = Shows the magnitude of the peak.
To limit the information in the list, you can define a new threshold level for the DTF list,
so that only the peaks above a certain level are included in the list.
1. For model .02, press the [DTF CONFIG] key.
For model .12, press the [DTF/BW] key.
2. Select the "DTF List Threshold" softkey.
The R&S Cable Rider ZPH opens a submenu to specify the threshold in dB.
3. Enter the threshold you require.
The R&S Cable Rider ZPH now only shows the peaks that are above the level you
have entered.
DTF Meas Overview
The "DTF Meas Overview" softkey displays the
Configuration Overview
of the DTF
measurement.
For more information, see
Chapter 4.1.4.1, "Configuration Overview"
,
on page 36.
7.2.2
Configuring the Horizontal Axis
The [FREQ/DIST] key contains all necessary functions to define the frequency and dis-
tance parameters when performing cable measurements. The contents of the menu
depend on the currently selected measurement.
Configuring Cable and Antenna Tests
