Remote Commands
R&S
®
Cable Rider ZPH
480
User Manual 1321.0950.02 ─ 07
List of commands
CALCulate<1...2>:MATH<1...2>:STATe
............................................................................ 480
CALCulate<1...2>:MARKer<1...6>:AOFF
..........................................................................480
CALCulate<1...2>:MARKer<1...6>:X
................................................................................ 480
CALCulate<1...2>:MARKer<1...6>:Y?
.............................................................................. 481
CALCulate<1...2>:DELTamarker<1...6>[:STATe]
................................................................ 481
CALCulate<1...2>:DELTamarker<1...6>:AOFF
.................................................................. 482
CALCulate<1...2>:DELTamarker<1...6>:X
.........................................................................482
CALCulate<1...2>:DELTamarker<1...6>:X:RELative
...........................................................482
CALCulate<1...2>:DELTamarker<1...6>:Y?
....................................................................... 483
CALCulate<1...2>:MATH<1...2>:STATe
<State>
This command turns trace mathematics on and off.
The numeric suffix at CALCulate is irrelevant for this command.
The numeric suffix at MATH selects the number of the trace.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
CALC:MATH:STAT ON
Switches on the trace mathematics.
CALCulate<1...2>:MARKer<1...6>:AOFF
This command turns off all active markers, delta markers and active marker measure-
ment functions.
This command is an event and therefore has no query and no *RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
MARKer selects the marker.
Example:
CALC:MARK:AOFF
Switches off all markers.
Usage:
Event
CALCulate<1...2>:MARKer<1...6>:X
<FrequencyOrTime>
This command positions a marker on a particular coordinate on the horizontal axis.
If one or more delta markers (2 to 6) are already active, the command turns these delta
markers into normal markers.
Note that it is possible to place the marker outside the visible trace. In that case, this
value is invalid.
If necessary, the corresponding delta marker is activated first.
Remote Control - Commands
