Remote Commands
R&S
®
Cable Rider ZPH
390
User Manual 1321.0950.02 ─ 07
Suffix:
<1..3>
.
1..3
Parameters:
<InputMode>
CHANnel | FREQ
CHANnel
Sets the frequency input mode to selection of a channel.
FREQ
Sets the frequency input mode to frequency input (in Hz).
*RST:
FREQ
Example:
FREQ:INP:MODE CHAN
Sets the frequency mode to work with channel tables.
[SENSe:]FREQuency:MODE
<SweepMode>
This command sets the measurement domain (frequency or time).
In the time domain (CW and FIXed), set the frequency with:
[SENSe:]FREQuency:CENTer
on page 341
In the frequency domain (SWEep), set the frequency with:
[SENSe:]FREQuency:CENTer
on page 341
[SENSe:]FREQuency:SPAN
on page 342
[SENSe:]FREQuency:STARt
on page 343
[SENSe:]FREQuency:STOP
on page 343
Parameters:
<SweepMode>
SWEep | CW | FIXed | SCAN
SWEep
Selects the frequency domain (span > 0).
CW
Selects the time domain (span = 0).
FIXed
Selects the time domain (span = 0).
SCAN
Selects the frequency domain (span > 0).
*RST:
SWEep
Example:
FREQ:MODE SWE
Activates frequency domain measurements.
[SENSe:]FREQuency:OFFSet
<FreqOffset>
This command defines a frequency offset.
Remote Control - Commands
