Basic Operation
R&S
®
Cable Rider ZPH
32
User Manual 1321.0950.02 ─ 07
4
Basic Operation
The following chapters provide an overview on the measurements that you can per-
form with the R&S Cable Rider ZPH.
●
Screen Layout and Elements
..................................................................................32
●
Configuring the R&S Cable Rider ZPH
................................................................... 39
●
Connecting the R&S Cable Rider ZPH to a PC
...................................................... 59
●
Managing Options
...................................................................................................65
●
Identifying Cable Faults
...........................................................................................69
●
Measuring Transmissions
....................................................................................... 74
●
Using the Spectrum Analyzer
..................................................................................76
●
Using a Power Sensor
............................................................................................ 83
●
Saving and Recalling Results and Settings
............................................................ 88
4.1
Screen Layout and Elements
The following figure shows the screen layout in the cable and antenna test operating
mode. Screen layouts that show specifics for each operating mode or measurement
are provided in the corresponding sections of this manual.
Figure 4-1: R&S Cable Rider ZPH screen layout
1 = Measurement information
2 = GPS status
3 = Battery status
4 =
Title bar
5 = GPS information
6 = Date and time
7 =
Measurement result view
Screen Layout and Elements
