Remote Commands
R&S
®
Cable Rider ZPH
427
User Manual 1321.0950.02 ─ 07
CALCulate<1...2>:LIMit<1...2>:STATe
.............................................................................. 430
CALCulate<1...2>:LIMit<1...2>:UNIT:X?
............................................................................430
CALCulate<1...2>:LIMit<1...2>:UNIT[:Y]?
......................................................................... 431
CALCulate<1...2>:LIMit<1...2>:LOWer:SELect
.................................................................. 431
CALCulate<1...2>:LIMit<1...2>:UPPer:SELect
...................................................................431
CALCulate<1...2>:LIMit<1...2>:LOWer:THReshold
............................................................ 432
CALCulate<1...2>:LIMit<1...2>:UPPer:THReshold
............................................................. 432
CALCulate<1...2>:LIMit<1...2>:BEEP[:STATe]
<State>
This command turns the beeper that beeps if a limit line is violated on and off.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
CALC:LIM:BEEP ON
Activates the audio beep.
CALCulate<1...2>:LIMit<1...2>:COMMent?
This command queries the description of a limit line.
This command is a query and therefore has no RST value.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
LIMit selects the limit line.
Suffix:
<1...2>
.
1...2
<1...2>
1...2
Example:
CALC:LIM:COMM?
Queries the description of limit line 1.
Usage:
Query only
Remote Control - Commands
