Rohde & Schwarz 1321.1211.02, User Manual

Page: 425 / 621

Remote Commands
R&S
®
Cable Rider ZPH
418 User Manual 1321.0950.02 ─ 07
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>[:STATe] <State>
This command turns marker search limits on and off.
The search limit restricts the evaluation range of the trace when "set marker" functions
are performed. For example, marker set to peak with command
CALCulate<1...2>:
MARKer<1...6>:MAXimum[:PEAK]
on page 360 sets the marker only at the peak of
the trace within the search limit.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
MARKer selects the marker.
Parameters:
<State> ON | OFF
*RST:
OFF
Example: See
CALCulate<1...2>:MARKer<1...6>:X:
SLIMits<1...2>:RIGHt
on page 362.
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>:LEFT <SearchLimit>
This command defines the left limit of the marker search range.
To use the command, you first have to turn on search limits with
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>[:STATe]
on page 362.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
MARKer selects the marker.
Parameters:
<SearchLimit> Sets the left marker search limit.
The unit in the spectrum analyzer mode depends on the mea-
surement, e.g. Hz for measurements in the frequency domain
and seconds for measurements in the time domain.
Range:
Maximum span.
*RST: – (is set to the left diagram border when switching
on search limits)
Default unit: GHz
Example: See
CALCulate<1...2>:MARKer<1...6>:X:
SLIMits<1...2>:RIGHt
on page 362.
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>:RIGHt <SearchLimit>
This command defines the right limit of the marker search range.
To use the command, you first have to turn on search limits with
CALCulate<1...2>:MARKer<1...6>:X:SLIMits<1...2>[:STATe]
on page 362.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
MARKer selects the marker.
Remote Control - Commands