Remote Commands
R&S
®
Cable Rider ZPH
445
User Manual 1321.0950.02 ─ 07
The adjacent channel is the first pair of channels next to the transmission channels. If
you set the channel bandwidth for these channels, the R&S Cable Rider ZPH sets the
bandwidth of the alternate channels to the same value.
Instead of BWIDwidth, you can also use the alias BANDth.
Parameters:
<AdjChBw>
*RST:
14 kHz
Default unit: GHz
Example:
See
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
on page 448.
[SENSe:]POWer:ACHannel:BWIDth:ALTernate<1...11>
<AltChannelBandwidth>
This command defines the bandwidth of the alternate channels.
If you set the channel bandwidth for the first alternate channel, the R&S Cable Rider
ZPH sets the bandwidth of the other alternate channels to the same value. The com-
mand works hierarchically: to set a bandwidth of the 10th and 8th channel, you have to
set the bandwidth of the 8th channel first.
Instead of BWIDwidth, you can also use the alias BANDth.
The suffix at ALTernate selects one of the 11 alternate channels.
Suffix:
<1...11>
.
1...11
Parameters:
<AltChBw>
*RST:
14 kHz
Default unit: GHz
Example:
See
[SENSe:]POWer:ACHannel:TXCHannel:COUNt
on page 448.
[SENSe:]POWer:ACHannel:MODE
<AdjacentChannelMode>
This command selects the way the R&S Cable Rider ZPH displays the power of adja-
cent channels.
The number of adjacent and alternate channels has to be greater than 0 for the com-
mand to work.
Parameters:
<AdjChMode>
ABSolute | RELative
ABSolute
Shows the absolute power of all channels..
RELative
Shows the power of adjacent and alternate channels in relation
to the transmission channel.
Example:
POW:ACH:MODE ABS
Shows absolute powers for all channels.
Remote Control - Commands
