Remote Commands
R&S
®
Cable Rider ZPH
490
User Manual 1321.0950.02 ─ 07
Parameters:
<MagnitudeError>
<numeric value>
Default unit: PCT
Example:
CALC:MARK:FUNC:DDEM:MERR?
Query magnitude error.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:DDEMod:MINDex[:RESult]?
This command queries the modulation index of the measured signal.
Prerequisites for this command: Select ASK demodulation
[SENSe:]DDEMod
on page 491.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<ModIndex>
<numeric value>
Default unit: PCT
Example:
CALC:MARK:FUNC:DDEM:MIND?
Query modulation index.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:DDEMod:MOERror[:RESult]?
This command queries the modulation error.
The numeric suffix at CALCulate is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<ModError>>
<numeric value>
Default unit: PCT
Example:
CALC:MARK:FUNC:DDEM:MOER?
Query modulation error.
Usage:
Query only
CALCulate<1...2>:MARKer:FUNCtion:DDEMod:MPOWer[:RESult]?
This command queries the power of the carrier signal.
The numeric suffix at CALCulate is irrelevant for this command.
Remote Control - Commands
