Basic Operation
R&S
®
Cable Rider ZPH
36
User Manual 1321.0950.02 ─ 07
Parameter
Description
Time & Date
Display time and date of the instrument. This is a
read-only field.
See
Chapter 4.2.4, "Configuring Date and Time"
,
on page 47 and
"Setting the date format"
on page 49.
"REF"
Configure the reference level of the measurement.
See
Chapter 7.2.3, "Configuring the Vertical Axis"
,
on page 150.
"Points"
Configure the number of measurement points.
See
Chapter 7.2.6.2, "Changing the Number of
Measurement Points"
,
on page 154.
"Trace"
Toggle the trace parameter to select the different
trace mode (Clear, Avg).
See
Chapter 7.3.1, "Working with Traces"
,
on page 155.
"TG Power"
Configure the power level for tracking generator.
Available only with model .12.
"DC Bias"
Configure DC bias output voltage.
Available only with model .12
See
Configuring the BIAS output port
.
"RBW"
Configure the resolution bandwidth of the DTF mea-
surement.
Available only with model .12.
Configure Overview
Display the configuration overview window for more
configuration options used in the measurement.
Configuration overview is operation mode depend-
ent.
See
Chapter 4.1.4.1, "Configuration Overview"
,
on page 36.
4.1.4.1
Configuration Overview
This is a dedicated button located at the bottom of the "Parameter View". It is operation
mode dependent. See
Figure 4-1
.
When you select this button, it opens the "Config Overview" window. Accessing it with-
out the touchscreen input is possible via the [SETUP] key. See
Chapter 5.5, "Configur-
ing Measurements"
,
on page 101.
The "Config Overview" illustrates here shows the flow of a distance-to-fault (DTF) mea-
surement at different stages and the relevant parameters which have an impact on the
measurement at each stage.
Screen Layout and Elements
