Spectrum Analyzer Mode
R&S
®
Cable Rider ZPH
233
User Manual 1321.0950.02 ─ 07
You can put both traces into the internal memory of the R&S Cable Rider ZPH and
restore them later. Note that the memory trace 1 and memory trace 2 have a lighter
tone color.
8.2.7.4
Working with Memory Traces
You can save the image of both traces to the memory of the R&S Cable Rider ZPH and
later restore it and compare it to a live trace. The memory trace is always colored white
to distinguish it from the live trace.
Measurement settings
Because the memory trace is just a bitmap, any modifications to measurement settings
like span or reference level are nor reflected in the memory trace.
When you save a data set, the R&S Cable Rider ZPH also stores the associated trace
in the trace memory. If you restore it at a later time, you can display the memory trace
as if it is a normal memory trace.
1. Press the [TRACE] key.
2. Select the trace you want to store in the trace memory with the "Select Trace" soft-
key.
3. Select the "Trace
▶
Memory" softkey.
The R&S Cable Rider ZPH saves the active trace.
4. Select the "Show" softkey.
5. Select the "Enable Memory 1 " menu item.
Configuring Spectrum Measurements
