Remote Commands
R&S
®
Cable Rider ZPH
496
User Manual 1321.0950.02 ─ 07
CALibration<1...2>:PMETer:ZERO:AUTO
<ONCE>
This command starts to zero the power sensor.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALibration is irrelevant for this command.
Parameters:
<ONCE>
ONCE
Example:
CAL:PMET:ZERO:AUTO ONCE
Starts to zero the power meter.
14.6.6.6
Forward Power Display
Note that the forward power is only available in conjunction with the R&S FSH-Z14 or
R&S FSH-Z44.
List of commands
[SENSe:]PMETer:DETector[:FUNCtion]
............................................................................ 496
[SENSe:]PMETer:DETector[:FUNCtion]
<Detector>
This command selects the forward power display of the power sensor.
Parameters:
<Detector>
AVERage | PENVelope
AVERage
Displays the average power.
PENVelope
Displays the peak envelope power.
*RST:
-
Example:
PMET:DET AVER
Selects the Average weighting mode.
14.6.6.7
Defining the Video Bandwidth
Selecting a video bandwidth is only possible when you are measuring the peak enve-
lope power with the R&S FSH-Z44 power sensor based on a customized (= user) stan-
dard.
See the following commands for more information about these conditions:
●
[SENSe:]PMETer:DETector[:FUNCtion]
on page 496
●
CALCulate<1...2>:PMETer:PRESet[:STATe]
on page 498
●
CALCulate<1...2>:PMETer:PRESet:SELect
on page 498
Remote Control - Commands
