Remote Commands
R&S
®
Cable Rider ZPH
355
User Manual 1321.0950.02 ─ 07
TRACe<1...2>[:DATA]?
[<arg0>]
This command queries the trace data of the current measurement.
It also transfers data from a file to a particular trace.
With the command
FORMat[:DATA]
on page 354, you can set the data format.
With the command
CALCulate<1...2>:FEED
on page 468, you can selects the
result display.
The numeric suffix at TRACe is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<arg0>
TRACe1 | TRACe2 | LIST | PHOLd | RAW
TRACe1
Queries the data of trace 1.
TRACe2
Queries the data of trace 2.
LIST
Queries the peak list of the measurement.
PHOLd
Queries the scanned peak hold list in the receiver mode mea-
surement.
RAW
Queries the raw FSK/ASK data in the analog demodulation
mode measurement.
The R&S Cable Rider ZPH returns 711 values. Each value cor-
responds to one pixel of a trace.
The unit depends on the measurement and the unit you have
set with
UNIT<1...2>:POWer
.
Note: If you use the auto peak detector, the command reads out
positive peak values only.
Example:
TRAC:DATA? TRACE1
Reads out the data for trace 1.
Usage:
Query only
14.6.2.6
Using Markers
The following commands control the operation of marker, delta markers and marker
functions.
Markers and Delta Markers
The following commands are for setting and controlling markers and deltamarkers.
Remote Control - Commands
