Interference Analyzer
R&S
®
Cable Rider ZPH
294
User Manual 1321.0950.02 ─ 07
13.2
Signal Strength Mapping
In the signal strength mapping mode, the R&S Cable Rider ZPH provides two map
measurements for selection:
Outdoor mapping
and
Indoor mapping
.
1. Press the [MODE] key.
2. Select the "Spectrum Analyzer" softkey.
The R&S Cable Rider ZPH opens a submenu that contains the spectrum analyzer
measurement menu items.
3. Select the "Maps" menu item.
The R&S Cable Rider ZPH enters the map application.
4. Press the [MEAS] softkey.
5. Select the "Meas Mode" softkey.
The R&S Cable Rider ZPH opens a submenu that contains the two map measure-
ments for selection.
Outdoor mapping
► Select the "Outdoor Mapping" menu item.
The R&S Cable Rider ZPH enters the outdoor mapping mode.
For more information , see
Chapter 13.3, "Working with Maps"
,
on page 294 and
Chapter 13.3.5.1, "Outdoor Mapping"
,
on page 307.
Indoor mapping
► Select the "Indoor Mapping" menu item.
The R&S Cable Rider ZPH enters the indoor mapping mode.
For more information , see
Chapter 13.3, "Working with Maps"
,
on page 294 and
Chapter 13.3.5.3, "Indoor Mapping"
,
on page 314.
13.3
Working with Maps
Equipped with option R&S ZPH-K16, you can make spectrum measurements and save
the position of these measurements on the map. Using the triangulation method, you
can determine the source of interference on the map.
To make full use of the functions available in map mode, you need a GPS receiver and
an antenna (for example R&S HL300, this antenna already contains a GPS receiver).
To work with small scale map like floor plan, the "Indoor Mapping" provides the func-
tionality to measure the signal strength indoors using an antenna (for example R&S
HL300).
Working with Maps
