Remote Commands
R&S
®
Cable Rider ZPH
457
User Manual 1321.0950.02 ─ 07
CALCulate<1...2>:MARKer<1...6>:FUNCtion:TXPower:RESult?
This command queries the total TX channel power. Use
CALCulate<1...2>:
MARKer<1...6>:FUNCtion:POWer:RESult?
on page 437 to query the power of
each TX channel.
The suffix at CALCulate and MARKer are irrelevant for this command.
Parameters:
<Return values>
<Power>
The power is either the peak power or the channel power,
depending on the selected standard.
Example:
CALC:MARK:FUNC:TXP:RES?
Queries the total channel power over all TX channels.
Usage:
Query only
[SENSe:]ESPectrum:PRESet[:STANdard]
<FileName>
This command loads one of the predefined spectrum emission masks for a telecommu-
nications standard.
Parameters:
<FileName>
String containing the filename of the spectrum emission mask.
Example:
ESP:PRES 'W-CDMA 3GPP.semstd'
Loads the SEM for 3GPP WCDMA.
[SENSe:]ESPectrum:PRESet:SETTings
<ONCE>
This command optimizes the settings for the SEM measurement.
This command is an event and therefore has no query and no *RST value.
Parameters:
<ONCE>
ONCE
Example:
ESP:PRES:SET ONCE
Initializes an adjustment of the settings.
Usage:
Setting only
[SENSe:]SWEep:MODE
<SweepMode>
This command turns the spectrum emission mask measurement on and off.
Parameters:
<SweepMode>
LIST | ESPectrum | AUTO
LIST
Turns on the Spurious Emission measurement.
ESPectrum
Turns on the SEM measurement.
Remote Control - Commands
