Remote Commands
R&S
®
Cable Rider ZPH
442
User Manual 1321.0950.02 ─ 07
<1...6>
1...6
Parameters:
<Percentage>
The numeric suffix at CALCulate is irrelevant for this command.
Example:
CALC:MARK:FUNC:OBW:BAND:PCT 95
Sets the power percentage to 95%.
TDMA Measurements
The following commands configure TDMA measurements. To perform the actual mea-
surement, use the commands described in section
Chapter 14.6.3.5, "Performing and
Triggering Measurements"
,
on page 402.
List of commands
CALCulate<1...2>:MARKer<1...6>:FUNCtion:TDMA:BURSt
............................................... 442
CALCulate<1...2>:MARKer<1...6>:FUNCtion:TDMA:BURSt
<BurstLength>
This command defines the burst length of the TDMA signal.
The numeric suffix at CALCulate and MARKer are irrelevant for this command.
Parameters:
<BurstLength>
Range:
Depends on the current sweep time.
*RST:
470 us
Default unit: s
Example:
CALC:MARK:FUNC:TDMA:BURS 80 US
Sets the burst length to 80 us.
Measuring the Adjacent Channel Leakage Ratio
The following commands configure Adjacent Channel Leakage Ratio (ACLR) measure-
ments. To perform the actual measurement, use the commands described in section
Chapter 14.6.3.5, "Performing and Triggering Measurements"
,
on page 402.
Configuring and Performing the ACLR Measurement
The following commands configure and perform the ACLR measurements.
List of commands
CALCulate<1...2>:MARKer<1...6>:FUNCtion:ACPower:UNIT
............................................. 443
[SENSe:]POWer:ACHannel:ACPairs
................................................................................443
[SENSe:]POWer:ACHannel:BANDwidth[:CHANnel]
........................................................... 443
[SENSe:]POWer:ACHannel:BANDwidth[:ACHannel]
..........................................................444
[SENSe:]POWer:ACHannel:BANDwidth[:ALTernate<1...11>]
.............................................. 444
[SENSe:]POWer:ACHannel:BWIDth[:CHANnel]
................................................................ 444
[SENSe:]POWer:ACHannel:BWIDth:ACHannel
................................................................. 444
[SENSe:]POWer:ACHannel:BWIDth:ALTernate<1...11>
......................................................445
[SENSe:]POWer:ACHannel:MODE
.................................................................................. 445
[SENSe:]POWer:ACHannel:PRESet:RLEVel
.....................................................................446
Remote Control - Commands
