Remote Commands
R&S
®
Cable Rider ZPH
523
User Manual 1321.0950.02 ─ 07
SYSTem:PRESet:USER
<PathName>
This command selects a file containing a user defined preset state.
Parameters:
<PathName>
Filename of the user defined preset state.
SYSTem:REBoot
This command initiates a reboot of the R&S Cable Rider ZPH.
This command is an event and therefore has no *RST value and no query.
Example:
SYST:REB
Restarts the R&S Cable Rider ZPH.
Usage:
Event
SYSTem:SET
[<arg0>]
This query
SYSTem:SET?
causes the data of the current instrument setting to be
transmitted to the control computer in binary format (SAVE function). The data can be
read back into the instrument (RECALL function) by means of command
SYSTem:SET
<block>
.
Whilst the data records are stored on the instrument hard disk with SAVE/RECALL
(
MMEMory:STORe
,
MMEMory:LOAD
), it is possible to store the data in an external com-
puter by means of
SYSTem:SET
.
The receive terminator has to be set to EOI to ensure reliable transfer of data (setting
SYST:COMM:GPIB:RTER EOI
).
Parameters:
<arg0>
<block_data>
Example:
SYST:SET
SYSTem:SHUTdown
This command turns the R&S Cable Rider ZPH off.
This command is an event and therefore has no *RST value and no query.
Example:
SYST:SHUT
Turns the R&S Cable Rider ZPH off.
Usage:
Event
SYSTem:TIME
<Hour>, <Minutes>, <Seconds>
This command sets the internal clock.
Parameters:
<Hour>
Range:
0 to 23
Remote Control - Commands
