Rohde & Schwarz 1321.1211.02, User Manual

Page: 364 / 621

Remote Commands
R&S
®
Cable Rider ZPH
357 User Manual 1321.0950.02 ─ 07
Usage: Event
CALCulate<1...2>:DELTamarker<1...6>:MAXimum[:PEAK]
This command positions a delta marker on the current trace maximum.
If necessary, the corresponding delta marker is activated first.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
DELTamarker selects the deltamarker.
Example: CALC:DELT3:MAX
Moves delta marker 3 to the maximum peak.
Usage: Event
CALCulate<1...2>:DELTamarker<1...6>:MAXimum:NEXT
This command positions a delta marker on the next smaller trace maximum.
If necessary, the corresponding delta marker is activated first.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
DELTamarker selects the deltamarker.
Example: CALC:DELT2:MAX:NEXT
Moves delta marker 2 to the next smaller maximum peak.
Usage: Event
CALCulate<1...2>:DELTamarker<1...6>:MINimum[:PEAK]
This command positions a delta marker on the current trace minimum.
If necessary, the corresponding delta marker is activated first.
This command is an event and therefore has no *RST value and no query.
The numeric suffix at CALCulate is irrelevant for this command. The numeric suffix at
DELTamarker selects the deltamarker.
Example: CALC:DELT3:MIN
Moves delta marker 3 to the trace minimum.
Usage: Event
CALCulate<1...2>:DELTamarker<1...6>:X <FrequencyOrTime>
This command positions a delta marker on a particular coordinate on the horizontal
axis.
Remote Control - Commands