Interference Analyzer
R&S
®
Cable Rider ZPH
314
User Manual 1321.0950.02 ─ 07
Adding the triangulation result to the GPS position list
1. Select the "GPS Position" softkey.
2. Select the "Save" softkey.
The R&S Cable Rider ZPH opens a submenu to select the different geotags saving
options.
3. Select the "Triangulation" menu item.
The R&S Cable Rider ZPH opens an input field to enter a name and description for
the triangulation geotag.
4. Enter a name and description.
5. Select the "Save" button to save the new geotag.
The R&S Cable Rider ZPH creates a geotag in the "GPS Position List".
For more information on the "GPS Position List", see
"Managing geotags"
on page 309.
13.3.5.3
Indoor Mapping
When you enter the "Indoor Mapping" application, the R&S Cable Rider ZPH always
shows the signal strength at the top of the display or in the power bar at the left side of
the display. See
Figure 13-1
.
The method to collect data in the indoor mapping is similar to that of collecting geotags
in large-scale map mode.
When you perform a measurement at a particular spot on the map, the application cre-
ates a tag (represented by a colored dot) and draws it on the map at your current loca-
tion. The color of the dot represents the signal strength received at that location, see
Chapter 13.3.3.5, "Selecting Colors for Map Locations"
,
on page 301.
Creating tags
You can create a tag on any place of the map. To do so, you first have to move the
cross-hairs on the map display to the position you are currently at. For more informa-
tion, see
Chapter 13.3.3.4, "Aligning the Indoor Mapping Mode"
,
on page 300.
Working with Maps
