Remote Commands
R&S
®
Cable Rider ZPH
495
User Manual 1321.0950.02 ─ 07
Table 14-5: Power measurement with R&S FSH-Z14 and R&S FSH-Z44:
Unit 1
Forward power.
Unit 2
Reflected power.
Suffix:
<1...2>
.
1...2
Parameters:
<Unit>
DBM | DB | WATT | VSWR | W | DUVM | DBUV | DBMV |
DUVE | DMVE | W_M2 | V_M
Note on the parameter DB: when applied to UNIT1, the power is
relative to the reference level, when applied to UNIT2, the return
loss is displayed.
Note on the parameter VSWR: the parameter is only available if
applied to UNIT2.
Example:
UNIT1:PMET:POW DBM
When measuring with the R&S FSH-Z1, R&S FSH-Z18 or USB
power sensors: sets unit to dBm.
When measuring with the R&S FSH-Z14 or R&S FSH-Z44: sets
unit of forward power to dBm.
14.6.6.4
Defining the Measurement Time
The following chapter describes commands to define the measurement time of the
power sensor.
List of commands
[SENSe:]PMETer:MTIMe
................................................................................................ 495
[SENSe:]PMETer:MTIMe
<MeasTime>
This command sets the duration of measurements.
Available for measurements with a power sensor.
Parameters:
<MeasTime>
SHORt | NORMal | LONG
Example:
PMET:MTIMe SHOR
Sets a short measurement time for power measurements.
14.6.6.5
Zeroing of the Power Sensor
The following chapter describes commands to perform zeroing of the power sensor.
List of commands
CALibration<1...2>:PMETer:ZERO:AUTO
......................................................................... 496
Remote Control - Commands
