Fig. 14: Aligning Positioning Pin With Hole Of A/C Compressor Body
Courtesy of MAZDA MOTORS CORP.
A/C COMPRESSOR PULLEY INSTALLATION NOTE
1. Install the inner wheel of the pulley using a plastic hammer and SST (49 B018 003) to the compressor.
CAUTION:
If the SST is not properly positioned when the A/C compressor
pulley is press-fit, the A/C compressor axle will interfere with
the SST, possibly damaging component parts. Verify that the
SST and axle are properly positioned and perform the
procedure very carefully.
2007 Mazda MX-5 Miata Sport
2007 HVAC Control System - MX-5 Miata
Microsoft
Thursday, July 09, 2009 2:27:32 PM
Page 15
© 2005 Mitchell Repair Information Company, LLC.