Fig. 30: Identifying Adhesive Tape On Windshield Garnish
Courtesy of MAZDA MOTORS CORP.
WINDSHIELD GARNISH INSTALLATION
1. When installing a new windshield garnish, follow the procedure below:
1. Remove the adhesive remaining on the body using razor.
2. Remove any grease or dirt from the adhesion surface of the body.
2. When reusing the windshield garnish, follow the procedure below:
1. Remove the adhesive remaining on the windshield garnish and the body using a razor.
2. Remove any grease or dirt from the adhesion surface of the windshield garnish and body.
3. Apply primer to the bonding area of the windshield garnish.
4. Attach double-sided adhesive tape to the windshield garnish as shown in the figure.
Clearance
a.
16 mm {0.62 in}
b.
2.0 mm {0.07 in}
c.
1.5 mm {0.05 in}
d.
2.0 mm {0.07 in}
e.
16 mm {0.62 in}
WARNING:
Using a razor with bare hands can cause injury. Always wear gloves
when using a razor.
NOTE:
Double-sided adhesive tape has already been attached to the new
windshield garnish
NOTE:
Use 3M GT7116, GT7116FR and GT7104 double-sided adhesive tape
or equivalent.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Exterior Trim - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:32:12 PM
Page 20
© 2005 Mitchell Repair Information Company, LLC.
