manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Manual

"Intel Itanium Architecture - Software Developers Volume 3 Rev 2.3 Manual" is a comprehensive resource for software developers seeking a detailed understanding of Itanium architecture. This downloadable manual, available for free from our website, equips developers with essential knowledge to harness the power of Itanium processors in their applications.

Share
Download
background image

Intel

®

 Itanium

®

 Architecture Software Developer’s Manual, Rev. 2.3

233

11-30 Synchronization Requirements for Interruption Control Register Read Optimization .  .  .  . 2:340
11-31 Interruptions when Interruption Control Register Read Optimization is Enabled  .  .  .  .  .  . 2:341
11-32 Synchronization Requirements for Interruption Control Register Write Optimization  .  .  .  . 2:341
11-33 Interruptions when Interruption Control Register Write Optimization is Enabled  .  .  .  .  .  . 2:341
11-34 Synchronization Requirements for MOV-from-PSR Optimization .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:342
11-35 Interruptions when MOV-from-PSR Optimization is Enabled  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:342
11-36 Synchronization Requirements for MOV-from-CPUID Optimization.  .  .  .  .  .  .  .  .  .  .  .  . 2:343
11-37 Interruptions when MOV-from-CPUID Optimization is Enabled .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:343
11-38 Synchronization Requirements for Cover Optimization  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:343
11-39 Interruptions when Cover Optimization is Enabled  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:343
11-40 Synchronization Requirements for Bank Switch Optimization.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:344
11-41 Interruptions when Bank Switch Optimization is Enabled .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:344
11-42 Impact of clearing VCPUID bits with the a_tf optimization.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:345
11-43 Synchronization Requirements for Test Feature Optimization   .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:345
11-44 Synchronization Requirements for Interrupt Collection and User Mask Optimization .  .  .  . 2:346
11-45 Interruptions when Interrupt Collection and User Mask Optimization is Enabled  .  .  .  .  .  . 2:346
11-46 Virtualization Disables Summary   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:346
11-47 Supported Virtualization Optimization Combinations  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:349
11-48 PAL Procedure Index Assignment.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:354
11-49 PAL Cache and Memory Procedures  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:354
11-50 PAL Processor Identification, Features, and Configuration Procedures.  .  .  .  .  .  .  .  .  .  . 2:355
11-51 PAL Machine Check Handling Procedures  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:356
11-52 PAL Power Information and Management Procedures  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:356
11-53 PAL Processor Self Test Procedures  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:357
11-54 PAL Support Procedures   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   . 2:357
11-55 PAL Virtualization Support Procedures  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:357
11-56 State Requirements for PSR   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:359
11-57 Definition of Terms.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:360
11-58 System Register Conventions .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:361
11-59 General Registers – Static Calling Convention  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:362
11-60 General Registers – Stacked Calling Conventions  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:362
11-61 Application Register Conventions .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:363
11-62 Processor Brand Information Requested  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:366
11-63 Processor Bus Features .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:368
11-64 cache_type Encoding  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:370
11-65 Cache Line State when inv = 0  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:371
11-66 Cache Line State when inv = 1  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:372
11-67 Cache Memory Attributes  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   . 2:374
11-68 Cache Store Hints .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:375
11-69 Cache Load Hints  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:375
11-70 PAL_CACHE_INIT level Argument Values  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:376
11-71 PAL_CACHE_INIT restrict Argument Values  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:376
11-72

method

 Values.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:379

11-73

t_d

 Values .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:379

11-75

part

 Input Values and corresponding 

data

 Return Values .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:381

11-76

mesi

 Return Values  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:381

11-74

part

 Input Values.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:381

11-77

part

 Input Values.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:386

11-78

mesi

 Return Values  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:386

11-79 Interpretation of 

data

 Input Field.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:386

11-80 Hardware policies returned in 

cur_policy  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2:395

Summary of Contents for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3

VMware VCENTER CHARGEBACK 1.5 - API Manual preview
VCENTER CHARGEBACK 1.5 - API
Brand: VMware Pages: 150
McAfee WEBSHIELD SMTP Datasheet preview
WEBSHIELD SMTP
Brand: McAfee Pages: 2
AVG 8.5 EMAIL SERVER EDITION - V 85.4 User Manual preview
8.5 EMAIL SERVER EDITION - V 85.4
Brand: AVG Pages: 52
Patton electronics ForeSight 6100 Element Management System User Manual preview
ForeSight 6100 Element Management System
Brand: Patton electronics Pages: 70
Lucent Technologies CentreVu User Manual preview
CentreVu
Brand: Lucent Technologies Pages: 198
M-Audio Wayoutware TimewARP 2600 User Manual preview
Wayoutware TimewARP 2600
Brand: M-Audio Pages: 49
Southern Company My Link Manual preview
My Link
Brand: Southern Company Pages: 13
Source Technologies Ohioedge CRM+BPM User Manual preview
Ohioedge CRM+BPM
Brand: Source Technologies Pages: 36
Genius HyperMedia Center Manual preview
HyperMedia Center
Brand: Genius Pages: 12
Red Hat CERTIFICATE 8.0 RELEASE NOTES Release Note preview
CERTIFICATE 8.0 RELEASE NOTES
Brand: Red Hat Pages: 34
Intel AFCSASRISER User Manual preview
AFCSASRISER
Brand: Intel Pages: 192
F-SECURE ONLINE BACKUP Quick Installation Manual preview
ONLINE BACKUP
Brand: F-SECURE Pages: 10
E-Mu 404 Tutorials Manual preview
404
Brand: E-Mu Pages: 42
eCopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual preview
3323B001 - imageFORMULA ScanFront 220e
Brand: eCopy Pages: 192
FieldServer FS-8700-16 Driver Manual preview
FS-8700-16
Brand: FieldServer Pages: 32
Autodesk AUTOCAD MAP 3D Brochure preview
AUTOCAD MAP 3D
Brand: Autodesk Pages: 4
MACROMEDIA DIRECTOR MX 2004-DIRECTOR SCRIPTING Reference preview
DIRECTOR MX 2004-DIRECTOR SCRIPTING
Brand: MACROMEDIA Pages: 1130
Tascam 3.52 Release Notes preview
3.52
Brand: Tascam Pages: 4

Brands by name

Popular brands

Load more brands