manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Manual

Share
Download
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Manual Download Page 364

2:116

Volume 2, Part 1: Interruptions

•

Internal processor interrupts

 

–

 such as interval timer, performance monitoring, 

and corrected machine checks. These are always directed to the local processor. A 
unique vector number can be programmed for each source.

•

Other processors

 

–

 A processor can interrupt any individual processor, including 

itself, by sending an Inter-Processor Interrupt (IPI) message to a specific target 
processor. See 

“Inter-processor Interrupt Messages” on page 2:128

.

The destination of an interrupt message is any one processor in the system, and is 
specified by a unique processor identifier. A different destination can be specified for 
each interrupt. There is no mechanism to “broadcast” a single interrupt to all 
processors in the system.

The following terms are used in the interrupt definition:

• The processor is said to 

receive 

an interrupt, if one of the processor’s interrupt 

pins is asserted, the processor detected an interrupt message bus transaction 
containing the processor’s unique identifier, or the processor detected an internal 
interrupt event.

• After receiving an interrupt, the processor internally holds the interrupt 

pending

. 

The interrupt is said to be 

pended

 when it is received and held by the processor.

• For edge-sensitive interrupts, an external interrupt is held pending until the 

interrupt is acquired by software at which point it is said to be in-service. INITs and 
PMIs are held pending until the corresponding PAL vector is entered and PAL 
firmware clears the pending indication at which point they are said to be completed. 
For level-sensitive interrupts programmed through the LINT pins, the interrupt is 
held pending as long as the pin is asserted. Deassertion of a level-sensitive 
interrupt removes the pending indication (see 

“Edge- and Level-sensitive 

Interrupts” on page 2:131

).

• The processor maintains an individual interrupt pending indication for INITs. Since 

external interrupts and PMIs are also signified by a unique interrupt 

vector

 

number, the processor maintains individual pending indications per vector. An 
occurrence of an interrupt on a vector that is already marked as pending cannot be 
distinguished from previous interrupts on the same vector because the interrupts 
are pended in the same internal pending bit, and are therefore treated as “the 
same” interrupt occurrence.

• When interrupt delivery is enabled and the highest priority pending interrupt is 

unmasked (as defined below), the processor 

accepts

 the pending interrupt, 

interrupts the control flow of the processor and transfers control to the software 
interrupt handler.

• An external interrupt is said to be 

in-service 

when software 

acquires

 the interrupt 

vector from the processor by reading the IVR register (see 

“External Interrupt 

Vector Register (IVR – CR65)” on page 2:123

). The processor then removes the 

pending indication for the interrupt vector. The processor maintains one in-service 
indicator for each unique vector number. Note that there are no in-service 
indicators for INITs and PMIs.

• Once an external interrupt is in-service it remains so until software indicates 

service for that external interrupt is 

complete. 

By writing to the EOI register (see 

“End of External Interrupt Register (EOI – CR67)” on page 2:124

) software 

indicates that service for the highest-priority in-service external interrupt is 
complete. The processor then removes the in-service indication for the 
highest-priority external interrupt vector. INITs and PMIs are completed when PAL 
firmware clears the corresponding pending indication.

Summary of Contents for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands