manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Manual

Share
Download
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Manual Download Page 297

Volume 2, Part 1: Addressing and Protection

2:49

4.1.1.2

Translation Cache (TC)

The Translation Cache (TC) is an implementation-specific structure defined to hold the 
large working set of dynamic translations for memory references (including IA-32). 
Please see the processor-specific documentation for further information on Itanium 
processor TC implementation details.

 

The processor directly controls the replacement 

policy of all TC entries.

Entries are installed by software into the translation cache with the Insert Data 
Translation Cache (

itc.d

) and Insert Instruction Translation Cache (

itc.i

) 

instructions. The Purge Translation Cache Local (

ptc.l

) instruction purges all ITC/DTC 

entries in the local processor that match the specified virtual address range and region 
identifier. Purges of all ITC/DTC entries matching a specified virtual address range and 
region identifier among all processors in a TLB coherence domain can be globally 
performed with the Purge Translation Cache Global (

ptc.g

, 

ptc.ga

) instruction. The 

TLB coherence domain covers at least the processors on the same local bus on which 
the purge was broadcast. Propagation between multiple TLB coherence domains is 
platform dependent. Software must handle the case where a purge does not propagate 
to all processors in a multiprocessor system. Translation cache purges do not invalidate 
TR entries.

All the entries in a local processor’s ITC and DTC can be purged of all entries with a 
sequence of Purge Translation Cache Entry (

ptc.e

) instructions. A 

ptc.e

 does not 

propagate to other processors.

In all processor models, the translation cache has at least 1 instruction and 1 data entry 
in addition to the specified 8 instruction and 8 data translation registers. 
Implementations are free to implement translation cache arrays of larger sizes. 
Implementations may also choose to implement additional hierarchies for increased 
performance. At least one translation cache level is required to support all implemented 
page sizes. Additional hierarchy levels may or may not be performance optimized for 
the preferred page size specified by the virtual region, may be set-associative or fully 
associative, and may support a limited set of page sizes. Please see the 
processor-specific documentation for further information on the Itanium processor 
implementation details of the translation cache.

The translation cache is managed by both software and hardware. In general, software 
cannot assume any entry installed will remain, nor assume the lifetime of any entry 
since replacement algorithms are implementation specific. The processor may discard 
or replace a translation at any point in time for any reason (subject to the forward 
progress rules below). TC purges may remove more entries than explicitly requested. 
In the presence of a processor hardware error, the processor may remove TC entries 
and optionally raise a Corrected Machine Check Interrupt.

In order to ensure forward progress for Itanium architecture-based code, the following 
rules must be observed by the processor and software. 

• Software may insert multiple translation cache entries per TLB fault, provided that 

only the last installed translation is required for forward progress.

• The processor may occasionally invalidate the last TC entry inserted. The processor 

must eventually guarantee visibility of the last inserted TC entry to all references 
while PSR.ic is zero. The processor must eventually guarantee visibility of the last 
inserted TC entry until an 

rfi

 sets PSR.ic to 1 and at least one instruction is 

executed with PSR.ic equal to 1, and completes without a fault or interrupt. The last 

Summary of Contents for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands