manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Manual

"Intel Itanium Architecture - Software Developers Volume 3 Rev 2.3 Manual" is a comprehensive resource for software developers seeking a detailed understanding of Itanium architecture. This downloadable manual, available for free from our website, equips developers with essential knowledge to harness the power of Itanium processors in their applications.

Share
Download
background image

Volume 2, Part 1: Processor Abstraction Layer

2:397

PAL_GET_PSTATE

For SCDD logical processors, or HIDD logical processors that do not support platform 
power-caps, note that the 

performance_index

 returned for 

type

=0 and 

type

=3 will have 

identical values. This is because the most recent PAL_SET_PSTATE procedure call that 
returned a status of 0 will always succeed in transitioning to the requested performance 
state for these coordination domains (see PAL_SET_PSTATE procedure description for 
additional details). 

For SCDD logical processors, the PAL_GET_PSTATE procedure should always be called 
with 

type

 argument value of 0 or 3. On such processors, calling PAL_GET_PSTATE with 

type

 argument value of 1 or 2 is undefined. 

For HIDD logical processors, the 

type

 argument values of 1 and 2 are supported, since 

such processors can also support platform power-caps, which affect the 
weighted-average performance index.

If there was a thermal-throttling or hardware-initiated event (other than a platform 
power-cap) which affected the processor power/performance for the current time 
period, and the accuracy of the 

performance_index

 value has been impacted by the 

event, then the procedure will return with 

status

=1. The 

performance_index

 returned in 

this case will still have a value that falls within the range of possible 

performance_index

 

values for this processor implementation (i.e., 0 up to the highest variable p-state 

performance_index

 value).

The procedure, when called with 

type

=1 or 

type

=2, returns a fixed 

performance_index

 

value of 100 until the procedure has been called with 

type

=1 to reset computation of 

the weighted-average 

performance_index

. For subsequent invocations with 

type

=1 or 

Table 11-81. PAL_GET_PSTATE 

type

 Argument

type

Description

0

The 

performance_index

 returned will correspond to the target P-state requested by software.

•

For SCDD (software-coordinated dependency domain) logical processors, this is the 
P-state requested by the most recent PAL_SET_PSTATE procedure call made by any 
logical processor in the domain.

•

For HCDD (hardware-coordinated dependency domain) or HIDD (hardware-independent 
dependency domain) logical processors, this is simply the P-state requested by the most 
recent PAL_SET_PSTATE procedure call on this logical processor.

The value returned is not affected by platform power-caps.

1

The 

performance_index

 is a weighted-average value of the different P-states that the 

processor was operating in for the time duration between the current PAL_GET_PSTATE 
procedure call, and the previous invocation of PAL_GET_PSTATE with type=1. This allows 
the caller to establish a new starting point for subsequent computation of the 
weighted-average 

performance_index

. See 

Section 11.6.1, “Power/Performance States 

(P-states)” on page 2:315

 for more details on how the weighted average value is derived.

2

The 

performance_index

 is a weighted-average value of the different P-states that the 

processor was operating in for the time duration between the current PAL_GET_PSTATE 
procedure call, and the previous invocation of PAL_GET_PSTATE with type=1. This allows 
the caller to sample the current value of the 

performance_index

, without affecting the starting 

point used for computing the weighted-average performance_index.

3

The 

performance_index

 returned will correspond to the current instantaneous P-state of the 

dependency domain containing the logical processor, at the time of the procedure call. The 
value returned is not affected by platform power-caps. When variable P-states performance 
is supported, the 

performance_index

 may be higher than the P-state requested. Please see 

Section 11.6.1.4, “Variable P-state Performance” on page 2:322

 for more information about 

variable P-state performance.

All Other Values Reserved

Summary of Contents for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3

3Com NBX 100 Software Upgrade Instructions preview
NBX 100
Brand: 3Com Pages: 4
3Com TRANSCEND EM/NT 6.3 Installation Manual preview
TRANSCEND EM/NT 6.3
Brand: 3Com Pages: 39
Baracoda KEmul RS232 User Manual preview
KEmul RS232
Brand: Baracoda Pages: 9
Native Instruments Scarbee Mark 1 User Manual preview
Scarbee Mark 1
Brand: Native Instruments Pages: 14
Alcatel-Lucent Wireless Network Guardian 9900 Brochure preview
Wireless Network Guardian 9900
Brand: Alcatel-Lucent Pages: 2
Novell ZENworks Network Access Control 5.0 User Manual preview
ZENworks Network Access Control 5.0
Brand: Novell Pages: 534
ARTEX 570-2225 Manual preview
570-2225
Brand: ARTEX Pages: 33
Polycom CMA V4.0 User Manual preview
CMA V4.0
Brand: Polycom Pages: 23
nordic edge ASA 5500 Installation Manual preview
ASA 5500
Brand: nordic edge Pages: 49
Gallo Studio Devil User Manual preview
Studio Devil
Brand: Gallo Pages: 9
Intel Active Management Technology v5.0 Administrator'S Manual preview
Active Management Technology v5.0
Brand: Intel Pages: 143
F-SECURE POLICY MANAGER PROXY - Administrator'S Manual preview
POLICY MANAGER PROXY -
Brand: F-SECURE Pages: 43
Picsel CLIE PEG-NX73V User Manual preview
CLIE PEG-NX73V
Brand: Picsel Pages: 23
MACROMEDIA FLEX-FLEX BUILDER Tutorial preview
FLEX-FLEX BUILDER
Brand: MACROMEDIA Pages: 56
Nintendo RVLRRFPE Instruction Booklet preview
RVLRRFPE
Brand: Nintendo Pages: 34
UMAX Technologies PowerColor User Manual preview
PowerColor
Brand: UMAX Technologies Pages: 127
Xerox DocuPrint 100MX User Manual preview
DocuPrint 100MX
Brand: Xerox Pages: 74
ArcSoft Arcsoft Totalmedia3 Configuration Manual preview
Arcsoft Totalmedia3
Brand: ArcSoft Pages: 8

Brands by name

Popular brands

Load more brands