manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Manual

Share
Download
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Manual Download Page 1382

4:80

Volume 4: Base IA-32 Instruction Reference

CPUID—CPU Identification

 (Continued)

When the input value in EAX is 1, three unrelated pieces of information are returned to 
the EBX register:

• Brand index (low byte of EBX) 

–

 this number provides an entry into a brand string 

table that contains brand strings for IA-32 processors. Please refer to AP-485, 

Intel

®

 Processor Identification and the CPUID Instruction

 (Order Number 241618) 

for information on brand indices.

Note:

The Brand index field is not supported for processors based on Itanium 
architecture, zero (unsupported encoding) is returned.

• CLFLUSH instruction cache line size (second byte of EBX) 

–

 this number indicates 

the size of the cache line flushed with CLFLUSH instruction in 8-byte increments. 
This field is valid only when the CLFSH feature flag is set.

• Local APIC ID (high byte of EBX) 

–

 this number is the 8-bit ID that is assigned to 

the local APIC on the processor during power up.

Note:

The local APIC ID field is invalid for processors based on the Itanium 
architecture, reserved value is returned.  Software should check the 
feature flags to make sure they are not running on processors based on 
the Itanium architecture before interpreting the return value in this 
field.

When the EAX register contains a value of 1, the CPUID instruction (in addition to 
loading the processor signature in the EAX register) loads the EDX register with the 
feature flags. The feature flags (when a Flag = 1) indicate what features the processor 
supports. 

Table 2-5

 lists the currently defined feature flag values.

A feature flag set to 1 indicates the corresponding feature is supported. Software 
should identify Intel as the vendor to properly interpret the feature flags.

Table 2-5.

Feature Flags Returned in EDX Register

Bit

Mnemonic

Description

0

FPU

Floating Point Unit On-Chip.

 The processor contains an x87 FPU.

1

VME

Virtual 8086 Mode Enhancements.

 Virtual 8086 mode 

enhancements, including CR4.VME for controlling the feature, 
CR4.PVI for protected mode virtual interrupts, software interrupt 
indirection, expansion of the TSS with the software indirection bitmap, 
and EFLAGS.VIF and EFLAGS.VIP flags.

2

DE

Debugging Extensions.

 Support for I/O breakpoints, including 

CR4.DE for controlling the feature, and optional trapping of accesses 
to DR4 and DR5.

3

PSE

Page Size Extension.

 Large pages of size 4Mbyte are supported, 

including CR4.PSE for controlling the feature, the defined dirty bit in 
PDE (Page Directory Entries), optional reserved bit trapping in CR3, 
PDEs, and PTEs.

4

TSC

Time Stamp Counter.

 The RDTSC instruction is supported, including 

CR4.TSD for controlling privilege.

5

MSR

Model Specific Registers RDMSR and WRMSR Instructions.

 The 

RDMSR and WRMSR instructions are supported. Some of the MSRs 
are implementation dependent.

Summary of Contents for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands