manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Manual

Share
Download
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Manual Download Page 1184

Volume 3: Pseudo-Code Functions

3:285

is_read_only_reg(rtype, raddr)

Returns a one if the register addressed by 

raddr

 in the register bank of type 

rtype

 

is a read only register.

is_reserved_field(regclass, arg2, arg3)

Returns true if the specified data would write a one in a reserved field.

is_reserved_reg(regclass, regnum)

Returns true if register 

regnum

 is reserved in the 

regclass

 register file.

is_supported_hint(hint)

Returns true if the implementation supports the specified 

hint

. This function may 

depend on factors other than the 

hint

 value, such as which execution unit it is 

executed on or the slot number the instruction was encoded in.

itlb_ar()

Returns the page access rights from the ITLB for the page addressed by the current 
IP, or INVALID_AR if PSR.it is 0.

make_icache_coherent(paddr)

The cache line addressed by the physical address 

paddr

 is flushed in an 

implementation-specific manner that ensures that the instruction cache is coherent 
with the data caches.

mem_flush(paddr)

The line addressed by the physical address 

paddr

 is invalidated in all levels of the 

memory hierarchy above memory and written back to memory if it is inconsistent with 
memory.

mem_flush_pending_stores()

The processor is instructed to start draining pending stores in write coalescing and 
write buffers. This operation is a hint. There is no indication when prior stores have 
actually been drained.

mem_implicit_prefetch(vaddr, hint, type)

Moves the line addressed by 

vaddr

 to the location of the memory hierarchy specified 

by 

hint

. This function is implementation dependent and can be ignored. The 

type

 

allows the implementation to distinguish prefetches for different instruction types. 

mem_promote(paddr, mtype, hint)

Moves the line addressed by 

paddr

 to the highest level of the memory hierarchy 

conditioned by the access hints specified by 

hint

. Implementation dependent and 

can be ignored.

mem_read(paddr, size, border, mattr, 
otype, hint)

Returns the 

size

 bytes starting at the physical memory location specified by 

paddr

 

with byte order specified by 

border

, memory attributes specified by 

mattr

, and 

access hint specified by 

hint

. 

otype

 specifies the memory ordering attribute of this 

access, and must be UNORDERED or ACQUIRE.

mem_read_pair(*low_value, *high_value, 
paddr, size, border, mattr, otype, hint)

Reads the 

size

 / 2 bytes of memory starting at the physical memory address 

specified by 

paddr

 into 

low_value

, and the 

size

 / 2 bytes of memory starting at the 

physical memory address specified by (

paddr

 + 

size

 / 2) into 

high_value

, with 

byte order specified by 

border

, memory attributes specified by 

mattr

, and access 

hint specified by 

hint

. 

otype

 specifies the memory ordering attribute of this access, 

and must be UNORDERED or ACQUIRE.  No value is returned.

mem_write(value, paddr, size, border, 
mattr, otype, hint)

Writes the least significant 

size

 bytes of 

value

 into memory starting at the physical 

memory address specified by 

paddr

 with byte order specified by 

border

, memory 

attributes specified by 

mattr

, and access hint specified by 

hint

. 

otype

 specifies the 

memory ordering attribute of this access, and must be UNORDERED or RELEASE. 
No value is returned.

mem_write16(gr_value, ar_value, paddr, 
border, mattr, otype, hint)

Writes the 8 bytes of 

gr_value

 into memory starting at the physical memory address 

specified by 

paddr

, and the 8 bytes of 

ar_value

 into memory starting at the physical 

memory address specified by (

paddr

 + 8), with byte order specified by 

border

, 

memory attributes specified by 

mattr

, and access hint specified by 

hint

. 

otype

 

specifies the memory ordering attribute of this access, and must be UNORDERED or 
RELEASE. No value is returned.

mem_xchg(data, paddr, size, byte_order, 
mattr, otype, hint)

Returns size bytes from memory starting at the physical address specified by 

paddr

. 

The read is conditioned by the locality hint specified by 

hint

. After the read, the least 

significant 

size

 bytes of data are written to 

size

 bytes in memory starting at the 

physical address specified by 

paddr

. The read and write are performed atomically. 

Both the read and the write are conditioned by the memory attribute specified by 

mattr

 and the byte ordering in memory is specified by 

byte_order

. 

otype

 specifies 

the memory ordering attribute of this access, and must be ACQUIRE.

Table 3-1.

Pseudo-code Functions (Continued)

Function

Operation

Summary of Contents for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands