manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Manual

Share
Download
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Manual Download Page 350

2:102

Volume 2, Part 1: Interruptions

branch-related traps, IIP is written with the target of the branch; for all other 
traps, IIP is written with the address of the bundle or IA-32 instruction 
containing the next sequential instruction.

• IIPA receives the IP of the last successfully executed Itanium instruction. For 

IA-32 instructions, IIPA receives the IP of the faulting or trapping IA-32 
instruction.

• The interruption resources IFA, IIB0-1, IIM, IHA, and ITIR are written with 

information specific to the particular fault, trap, or interruption taken. These 
registers serve as parameters to each of the interruption vectors. The IFS valid 
bit (IFS.v) is cleared. All other bits in the IFS are undefined.

If PSR.ic is in-flight:

• Interruption state may or may not be collected in IIP, IPSR, IIPA, ITIR, IFA, IIM, 

IIB0-1 and IHA. 

• The value of IFS (including IFS.v) is undefined.

2. ISR bits are overwritten on all interruptions except for a Data Nested TLB fault. 

The instruction slot which caused the interruption is saved in ISR.ei (2 for traps, 1 
for other interruptions, on the L+X instruction of an MLX). For IA-32 code, ISR.ei 
is set to 0. If PSR.ic is 0 or in-flight when the interruption occurs, ISR.ni is set to 
1. Otherwise, ISR.ni is set to 0. ISR.ni is always 0 for interruptions taken in IA-32 
code.

3. The defined bits in the PSR are set to zero except as follows:

• PSR.up, PSR.mfl, PSR.mfh, PSR.pk, PSR.dt, PSR.rt, PSR.mc, and PSR.it are 

unchanged for all interruptions.

• PSR.be is set to the value of the default endian bit (DCR.be). If DCR.be is 

in-flight at the time of interruption, PSR.be may receive either the old value of 
DCR.be or the in-flight value.

• PSR.pp is set to the value of the default privileged performance monitor bit 

(DCR.pp). If DCR.pp is in-flight at the time of interruption, PSR.pp may receive 
either the old value of DCR.pp or the in-flight value.

Since PSR.cpl is set to zero, the processor will execute at the most privileged level.

4. RSE.CFLE is set to zero.

5. IP gets the appropriate IVA vector for the interruption. If IVA is in-flight at the 

time of interruption, IP receives either the vector specified by the old IVA value or 
the vector specified by the in-flight value.

6. The processor performs an instruction serialization and execution of Itanium 

instructions begins at the IP obtained in step 5 above. The instruction 
serialization event ensures that all previous control register changes and side 
effects due to such changes are visible to the first instruction of the interruption 
handler.

5.5.1

Efficient Interruption Handling

A set of 16 banked registers are provided by the processor to assist in the efficient 
processing of low-level Itanium interruptions and instruction emulation. These registers 
allow a low-level routine to have immediate access to a small set of static registers 
without having to save and restore their contents to memory at the start and end of 
each handler. The extra bank of registers exists in the same name space as the normal 

Summary of Contents for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands