Samsung S5PC110, Manual

Page: 1289 / 2426

S5PC110_UM 2 1BCAMERA INTERFACE
2-42
CITRGFMTn Bit Description Initial State
InRot90 [31]
1 = Rotate clockwise 90 ° (Using the Input Rotator only). Input
Rotator and Output Rotator do not work at the same time. If
InRot90 mode is enabled, then output data path should be LCD
FIFO path.)
0 = Input Rotator bypass
(ML=OO)
0
OutFormat [30:29] 00 = YCbCr 4:2:0 output image format (2 or 3 plane)
01 = YCbCr 4:2:2 output image format (2 or 3 plane)
(ref. 2 or 3 plane format register
→
C_INT_OUT)
10 = YCbCr 4:2:2 output image format (1 plane)
11 = RGB output image format (Ref. RGB format register
→
OutRGB_FMT).
Note: Refer to gathering extension register for format YCbCr444.
(ML=OO)
0
TargetHsize [28:16] Specifies the horizontal pixel number of target image. Refer to
gathering extension register (TargetHsize_ext).
Note.)
CAMIF0 and CAMIF2 : In case of output DMA, TargetHsize
should be multiple of 16.
CAMIF1 : In case of interlaced output DMA and
90-degree-rotation, TargetVsize should be more than 16
(ML=OO)
0
OutFlipMd [15:14] Specifies image mirror and rotation for output DMA.
00 = Normal
01 = X-axis mirror
10 = Y-axis mirror
11 = 180° rotation
Note)
User cannot use this function, If input format is among
CAM_JPEG or MIPI RAW or MIPI User-defined format.
(ML=OO) 0
OutRot90 [13] 1 = Rotate clockwise 90° (Using the Output Rotator)
0 = Output Rotator bypass
Note)
User cannot use this function, If input format is among
CAM_JPEG or MIPI RAW or MIPI User-defined format.
(ML=OO) 0