Parameters
List of parameters
1-460
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Description:
Displays the control word for the excitation equipment.
Description:
Displays the status word of the excitation equipment.
Dependency:
Refer to: p1645
Description:
Displays the torque generating current setpoint Iqset after the torque limits and the clock cycle interpolation is front
of the current setpoint filters.
Description:
Displays the force generating current setpoint Iqset after the force limits and the clock cycle interpolation is front of
the current setpoint filters.
r1648.0...10
CO/BO: Excitation, control word / Excitation STW
VECTOR (n/M)
Can be changed:
-
Calculated:
-
Access level:
2
Data type:
Unsigned16
Dynamic index:
-
Func. diagram:
6495, 6497
P-Group:
Displays, signals
Units group:
-
Unit selection:
-
Not for motor type:
ASM, PEM, REL
Expert list:
1
Min Max
Factory
setting
- -
-
Bit field:
Bit
Signal name
1 signal
0 signal
FP
00
Power-up excitation
Yes
No
-
01
Excitation no OFF2
Yes
No
-
02
Excitation no OFF3
Yes
No
-
03
Enable excitation operation
Yes
No
-
07
Excitation acknowledge fault
Yes
No
-
10
Master control by excitation equipment
Yes
No
-
r1649.0...7
CO/BO: Excitation status word / Excitation ZSW
VECTOR (n/M)
Can be changed:
-
Calculated:
-
Access level:
2
Data type:
Unsigned16
Dynamic index:
-
Func. diagram:
6495, 6497
P-Group:
Displays, signals
Units group:
-
Unit selection:
-
Not for motor type:
ASM, PEM, REL
Expert list:
1
Min Max
Factory
setting
- -
-
Bit field:
Bit
Signal name
1 signal
0 signal
FP
00
Excitation ready to be powered-up, feed-
back signal
Yes
No
-
01
Excitation ready feedback signal
Yes
No
-
02
Excitation in operation feedback signal
Yes
No
-
03
Excitation group signal fault
Yes
No
-
07
Excitation, group signal alarm
Yes
No
-
r1650
Current setpoint torque-generating before filter / Iq_set before filt
SERVO, VECTOR
(n/M)
Can be changed:
-
Calculated:
-
Access level:
3
Data type:
Floating Point
Dynamic index:
-
Func. diagram:
5710
P-Group:
Closed-loop control
Units group:
6_2
Unit selection:
p0505
Not for motor type:
-
Expert list:
1
Min Max
Factory
setting
- [Arms]
- [Arms]
- [Arms]
r1650
Current setpoint force-generating before filter / Iq_set before filt
SERVO (Lin)
Can be changed:
-
Calculated:
-
Access level:
3
Data type:
Floating Point
Dynamic index:
-
Func. diagram:
5710
P-Group:
Closed-loop control
Units group:
6_2
Unit selection:
p0505
Not for motor type:
-
Expert list:
1
Min Max
Factory
setting
- [Arms]
- [Arms]
- [Arms]
