Hitachi CHROMASTER 5160, Instruction Manual

Page: 863 / 1022

(continued)
1 ENT
USE ERROR OUT (YES=1, NO=0)
0
The ALL END signal will be output in ERROR OUT
on the e-Line. When ALL END “YES” is set, the
ALL END signal is output to the option input/output
circuit board irrespective of this setting.
For output in ERROR OUT, select “1” (YES) or “0”
(NO) for avoiding the output.
A wait time till output of the ALL END signal is
settable. For stopping the system with a short time
lag due to washing in the pump, a time period
should be set here taking a necessary time lag into
account.
15 ENT
Monitor screen reappears.
3 ENT
Select an operating condition.
1 ENT
For creating a new sequential program, input the
default rack code value at the first step.
1 ENT
OPERATION (RACK SELECT=1, INJ.METHOD=2,
1 APL PARAM=3)
RACK SELECT (1-16)
1
Monitor screen reappears.
ALL END TIME (0.1-100.0) min
15.0
(to be continued)
3 - 19