Hitachi CHROMASTER 5160, Instruction Manual

Page: 39 / 1022

3 - 2
(1) Press the power switch to turn on the power supply.
(2) At the start, LCD indicates startup screen. After a few
seconds, initial screen will be indicated, and an initialize-
processing test is executed simultaneously.
(a) Startup screen
Initializing, self-testing, and indicating a copyright are
performed. The program number and version will be
confirmed on the startup screen.
The first monitor screen will be indicated after
initialize-processing is completed normally.
Press
△ ▽
key to indicate from the second to
the fifth monitor screen.
Press
△ ▽
ESC key to return to the first
monitor screen.
(b) 1
st
Monitor Screen
Table 3-1 1
st
Monitor Screen
Indication Description
TIME Program precessing time
%A A fluid mixture ratio
%B B fluid mixture ratio
%C C fluid mixture ratio
%D D fluid mixture ratio
FLOW Pump flow rate
PRESS Pump pressure
C (or O) Auto purge valve open/close state (when it
is connected)
[ -- ] Pump state
* Two liquid low gradient operation is operated, so %C
and %D will be always zero.
TIME %A %B %C %D FLOW PRESS [ -- ]
0.0 100 0 0 0 0.000 0.0 C 1
PUMP 8928116-00
(C) Hitachi High-Technologies Corp. 2012